Seal It Accelerator

Seal It Accelerator must be used if you are applying Seal It Liquid Membrane below 5oC (41oF) to facilitate full cure at normal speed (average 1mm per 24hrs). If using Seal It Accelerator you must mix 1 tin at a time and use immediately otherwise the product will cure in the container. Mixing ratio is approximately 1L of accelerator to 20L of Liquid Membrane. For 5L of Liquid Membrane add 250ml of accelerator. Mix the two components thoroughly by hand using a paddle on a slow speed setting and ensure the accelerator is evenly distributed throughout the whole tin. Take care not to mix too quickly and introduce too much air into the mixture as this could lead to pin-holing in the final coating.